美国虚拟国家实验室协同创新机制——跨学科、全链路的灵活协同创新模式及启示

 以美国虚拟国家实验室（virtual national laboratory，VNL）为研究对象，运用文献研究法和案例分析法，梳理VNL发展路径和管理模式，以高新技术研发与应用转化为主线，总结提炼政府部门统筹协调、多类主体协同联动、高效信息沟通机制下的多主体、跨学科、全链路协同创新运行机制特点。结合VNL经验启示和中国当前矛盾问题，提出应积极探索市场需求牵引、跨产业链、复合型科研项目的创新机制，发挥国家实验室承上启下的衔接作用，撬动产业力量对基础科研形成补充，建立多主体、跨学科的科研需求响应机制等启示建议。     

相参频率捷变雷达目标稀疏重建性能边界综述

相比频率固定的脉冲多普勒体制, 频率捷变体制在抗干扰方面具有显著优势。但在该体制下, 基于匹配滤波的信号处理算法存在旁瓣平台问题, 难以与动目标检测兼容。压缩感知理论将目标参数估计建模作为欠定方程求解, 为该问题提供了解决思路。在相参频率捷变雷达中, 压缩感知能否准确重建目标是一个基础性问题。本文梳理了针对该问题的相关研究, 借助相变理论与相变曲线的解析表达式, 定量描述了捷变频雷达重建目标的成功概率与主要系统和目标参数之间的关系; 该理论性能边界与仿真实际所能达到的性能相接近。此外, 还探讨了现有成果在实际应用中的价值, 展望了未来研究方向。     

Controllability of Quantum Systems with SU(1, 1) Dynamical Symmetry

This paper presents sufficient and necessary conditions for the propagator controllability of a class of infinite-dimensional quantum systems with SU(1, 1) dynamical symmetry through the isomorphic mapping to the non-unitary representation of SU(1, 1). The authors prove that the elliptic condition of the total Hamiltonian is both necessary and sufficient for the controllability and strong controllability. The obtained results can be also extended to control systems with SO(2, 1) dynamical symmetry.     

门捷列夫的“旷缺”与中国公使的感叹

1869年门捷列夫完成了世界上第一张化学元素周期表,除了把当时所知的全部63种元素按原子量大小分组(族)排列外,还在表中留下一些空位,预言了与硼、铝、硅类似的元素的存在及其性质。随后的20多年内,这些空位相继被新发现的元素填补。1877年中国首任驻英公使郭嵩焘听到了门捷列夫的预言与元素镓的发现这一故事,联想到发现海王星的经过,由衷感叹西方科学的精致与功效。     

并行工程产品开发过程的建模方法学

在并行工程中，为了实现产品开发过程的集成、并行和最优化，首先要建立能够充分反映产品开发过程各方面信息的产品开发过程模型。通过对模型的仿真分析和优化，指导产品开发过程的实施。本文首先提出了并行工程产品开发过程模型是集成多视图模型，随后提出了采用集成多视图建模理论的并行工程产品开发过程建模、分析和管理的方法学框架     

网络路由收敛性能测试研究

在网络建设和运行中,采用测试的方法对其性能进行评估对于网络的正常运营具有重要的意义.本文研究了网络路由收敛性能测试方法,为得到路由收敛性能指标,对OSPF和iBGP的路由收敛时间进行了测量.提出了一种简化的路由收敛时间测量方法,通过测量数据平面的传输性能指标,对路由控制平面的收敛时间进行估算.该方法对于测试设备要求不高,实施简单方便.采用该方法在CERNET2投入运营之前对其进行了路由性能测试,实验结果表明CERNET2在路由变化时具有较好的路由收敛性能.     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

Modeling and Control of Active Suspensions for MDOF Vehicle

The conventional method for analyzing active suspension control for a vehicle is only to analyze a quarter or half car with a lower order degree-of-freedom (DOF) model, but such models do not actually model practical applications. Accurate models of a suspension control system require a multi-degree-of-freedom (MDOF) vehicle model with a detailed model of the controller. An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ control method. The control system performance has been investigated by comparing the H∞controller with a linear quadratic (LQ) controller.